Ammonia Cracker Furnace Unit

Product Details:

Ammonia cracking Unit

Ammonia cracking unit is being used for cracking the Ammonia in to Nitrogen and Hydrogen, This Unit consist of vertical rectangular cross section furnace with many other accessories. In this furnace retort is suspended form the top. The retort is made of 20% - 25% Chrome / Nickel seamless tubes. This material is suitable upto 1100° C temp. and safe for operating temperature for around 850 deg. C.( maximum). The retort is centrifugal casted having thickness of around 10 mm. On the side wall of the furnace coil type Ni-chrome heating elements are provided refractory supports. Temperature of the furnace box is controlled at 850° C. which in turn gives catalyst bed temperature inside the tubes of around 800° C.

The temperature controllers are twin point type. Lower temperature set point shall be at 800° C. to give alarm incase furnace temperature falls during normal operation. Upper set point would switch on and switch off heaters automatically to maintain furnace temperature at 850° C. heating elements are equally distributed throughout the furnace height and all catalyst tubes are uniformly heated on all sides. Furnaces has ceramic fibers lining and outside furnace wall temperature shall be maximum 60° C

Ammonia Cracker Unit being used with Gas Plant and some of the furnaces for feeding Hydrogen, we manufacturer different size of ammonia cracker as listed below

Additional Information:

• Production Capacity: 100 nm3/hr
• Delivery Time: 45 days

Product Details: