Gaztron Engineering Private Limited
Ecotech III, Greater Noida, Uttar Pradesh
SEND SMS
SEND EMAIL
GAZTRON engineering Pvt ltd is India’s leading Designers, manufactures and exports for State of Art PSA Nitrogen Gas Plants, PSA nitrogen Gas Generator & industrial Nitrogen Gas Generator. We use PSA TECHNOLOGY as per that IF air is passed under pressure through a vessel containing an adsorbent bed of CMS that attracts OXYGEN more strongly than it does Nitrogen, part or all of the OXYGEN will stay in the bed, and the gas coming out of the vessel will be enriched in Nitrogen. When the bed reaches the end of its capacity to adsorb OXYGEN, it can be regenerated by reducing the pressure, thereby releasing the adsorbed OXYGEN. It is then ready for another cycle of producing Nitrogen enriched air.
We use CMS material from GERAMAN & JAPAN AND We have available major three Models named as MS Model, Palladium DX Model and Copper DX model. MS model PSA NITROGEN GAS GENERATOR is for Nitrogen Purity of 90 % to 99.99 %, DX model and Cu – Dx Model is archives nitrogen purity up to 99.9999 %, In Dx- Model hydrogen content is 0.5 % to 1% which desirable for heat treatment and some of furnaces this model is more popular for Heat treatment applications However Cu- Dx Model hydrogen content is 0 %, means Nitrogen is free from Oxygen and Hydrogen which desirable Electronics parts manufacturing and some of automobile process.
GAZTRON PSA Nitrogen Gas Generator are Low Capital & running cost, Start-up time of only 10 to 15 minutes & Capacity Of Nitrogen Gas Generator is available from 5 Nm3/hr to 500 Nm3/hr at Discharge Pressure range is available from 5 Kg/ Cm2 to 7.5 Kg/cm2, Higher Pressure is available with BOOSTER for 30 Kg/cm2 and 150 Kg/cm2
Product Details:
| Minimum Order Quantity | 1 Set |
| Brand/Make | Gaztron |
| Flow Rate | 5 to 1000 Nm3/hr |
| Purity | 99.9995% |
| Condition | New |
| Dew Point | -20 to -40 Deg C |
| Automatic Grade | Automatic |
| Design | Standard |
| Discharge Pressure | 5 to 25 kg/cm2 |
MS MODEL OF PSA NITROGEN GAS GENERATOR
General
We are manufactures and exporter of MS Model PSA Gas Generators & Plants, MS Model Gas Generator is for purity of ranging from 90 % to 99.99 % and this model is widely used by industry for different applications it is most popular model of in NITROGEN GAS GENERATORS.
Models and available ranges
MODEL | CAPACITY NM3/HR |
GAZ-MS-05 | 0 TO 5 NM3/HR |
GAZ-MS-10 | 6 TO 10 NM3/HR |
GAZ-MS-20 | 11 TO 20 NM3/HR |
GAZ-MS-30 | 21 TO 30 NM3/HR |
GAZ-MS-50 | 31 TO 50 NM3/HR |
GAZ-MS-100 | 51 TO 100 NM3/HR |
Some of Application of MS model PSA based nitrogen gas generator
As Inert gas in Chemical Industries, Food / Packaging, Furnaces, Pharmaceutical Industries. For fire control in Coal mines, Automobile tyres, Air driven tools and machinery, Bacteria elimination (food packing), Beverage mixing/dispensing, Blanketing for adhesive curing, Brazing, Bright annealing, Cable splice drying, Cement plant, Chemicals plants/ refineries, Coal mine fire prevention, Oil recovery enhancement/oil extraction Heat treating, Injection mounding, Nitrogen tire inflation
Working principal
IF air is passed under pressure through a vessel containing an adsorbent bed of CMS that attracts OXYGEN more strongly than it does Nitrogen, part or all of the OXYGEN will stay in the bed, and the gas coming out of the vessel will be enriched in Nitrogen. When the bed reaches the end of its capacity to adsorb OXYGEN, it can be regenerated by reducing the pressure, thereby releasing the adsorbed OXYGEN. It is then ready for another cycle of producing Nitrogen enriched air.
Product Details:
| Minimum Order Quantity | 1 Piece |
| Automatic Grade | Automatic |
| Design | Standard |
| Capacity | 5 nm3/Hr to 500 nm3/hr |
| Purity | 99.9998% ( 2 PPM ) |
| Brand | Gaztron |
| Condition | New |
| Dew Point | -20 to -40 Deg C |
| Operating Air Pressure | 5 to 7.5 kg/cm2 |
DX MODEL OF PSA NITROGEN GAS GENERATOR WITH 99.9998% PURITY
General Description
We are manufactures and exporter of Dx Model PSA based Gas Generators & Plants, DX Model Nitrogen Gas Generator produced Ultra-Pure Nitrogen gas with Purity of 99.9999 % but in this model hydrogen content is 0.5 % to 1% which desirable for heat treatment and some of furnaces this model is more popular for Heat treatment applications
Models and available ranges
MODEL | CAPACITY NM3/HR WITH 99.9998 % ( 2 PPM ) PURITY AT 5.5 BAR |
GAZ-DX-05 | 0 TO 5 NM3/HR |
GAZ-DX-10 | 6 TO 10 NM3/HR |
GAZ-DX-20 | 11 TO 20 NM3/HR |
GAZ-DX-30 | 21 TO 30 NM3/HR |
GAZ-DX-50 | 31 TO 50 NM3/HR |
GAZ-DX-100 | 51 TO 100 NM3/HR |
Some of Application of DX model GAS GENERATORS
Food Packaging industry, curing of chemicals, Brazing, Annealing and bright Annealing, Heat treatments, coal mine fire prevention, Oil Recovery and Extraction, Gas Blanketing, Heat Treatment, Plastic Molding, pharmaceuticals, Electronics industry, sintering
Product Details:
| Minimum Order Quantity | 1 Set |
| Flow Rate (nm Cube/Hr) | 5 to 1000 Nm3/hr |
| Purity (%) | 85 to 99.6% |
| Condition | New |
| Dew Point (deg. Celsius) | -20 to -40 Deg C |
| Brand | Gaztron |
| Automatic Grade | Automatic |
| Design | Standard |
CU- DX TYPE PSA NITROGEN GAS GENERATOR WITH 99.9999% PURITY
General Description
We are manufactures and exporter of Cu-Dx Model PSA based Gas Generators, Cu DX Model Nitrogen Gas Generator produced Ultra-Pure Nitrogen gas with Purity of 99.9999 % ( 1 PPM ) , in this model hydrogen content is 0 %, means Nitrogen is free from Oxygen and Hydrogen which desirable Electronics parts manufacturing and some of automobile process
Models and available ranges
MODEL | CAPACITY NM3/HR WITH 99.9999 % ( 1 PPM ) PURITY AT 5.5 BAR |
GAZ-CU DX-05 | 0 TO 5 NM3/HR |
GAZ-CU DX-10 | 6 TO 10 NM3/HR |
GAZ-CU DX-20 | 11 TO 20 NM3/HR |
GAZ-CU DX-30 | 21 TO 30 NM3/HR |
GAZ-CU DX-50 | 31 TO 50 NM3/HR |
GAZ-CU DX-100 | 51 TO 100 NM3/HR |
Some of Application of CU-DX model GAS GENERATORS
Food Packaging industry, curing of chemicals, Brazing, Annealing and bright Annealing, Heat treatments, coal mine fire prevention, Oil Recovery and Extraction, Gas Blanketing, Heat Treatment, Plastic Molding, pharmaceuticals, Electronics industry, sintering